Keeping your stained glass beautiful is easy! Gently dust with a soft, lint-free cloth. For fingerprints or smudges, use a slightly damp microfiber cloth and dry thoroughly. Avoid ammonia-based cleaners (including most window cleaners!), abrasive sponges, and harsh chemicals, as they can damage the solder and patina. Pledge is your friend :)

Always hang your stained glass from a secure hook or hardware rated to support its weight. We do not recommend suction cups -except for very small suncatchers- as they can lose their grip without warning. Hang your piece using its attached chain or designated hanging points and avoid placing it where it could be bumped or knocked down.

Some people use a small cafe rod on their window or install a small hook into the window casing. We also sell wood bases if you want to make your piece shelf of tabletop decor.

Some stained glass pieces are suitable for outdoor display, while others are intended for indoor use only. Unless your piece is specifically labeled for outdoor use, we recommend keeping it indoors. Prolonged exposure to rain, humidity, strong winds, and extreme temperatures can damage finishes and hanging components.

Yes, and that's perfectly normal! Over time, solder and patina may naturally darken, dull, or develop a subtle aged appearance. This is part of the character of handcrafted stained glass. Keep your piece clean and dry, and avoid harsh chemicals or abrasive polishing, which can remove the finish.

Accidents happen! If your stained glass develops a crack, loose solder joint, or damaged hanging hardware, stop using or hanging it until it can be assessed. Contact us with a few photos of the damage, and we'll be happy to discuss whether a repair may be possible.

Don't worry! A white, powdery film on the solder lines is usually caused by oxidation, sometimes called "white mold" in the stained glass world. Despite the name, it's not actually mold! It can develop when solder reacts with moisture in the air or from leftover flux used during construction.

Gently wipe the affected areas with a soft, dry cloth. If the residue persists, contact us before using any cleaning products or polishes, as some can damage the patina. Keeping your stained glass clean and dry will help prevent it from returning.